Range Extender 2.5 Outdoor Antenna for Talking House Transmitter

Description

The Range Extender Outdoor Antenna and Tuner increases the effective signal range of a Talking House (Infospot) Radio Transmitter from hundreds to more than a thousand feet by providing a simple, professional means of installing the transmitting antenna outdoors in a weatherproof package. The included 25' coaxial cable connects directly to the "Outdoor Antenna" F connector on the rear of a Talking House Transmitter. The InfOspot AM Radio Transmitter System is unique as the only such license-free system certified under FCC part 15.219 with a variable length of coaxial cable in its approved design. The Range Extender Outdoor Antenna and Tuner are part of a complete Talking House (InfOspot) Radio System.
Power
:  Up to 100 MW.
Frequency
:  540-1700 kHz AM.
Typical Signal Range
:   Up to 2500’. Varies with mounting height and environment. 20’ mounting height recommended.
Mounting Locatio
n
:  Top of mast, pipe or pole, allowing Tuner and Antenna to be positioned entirely above the mounting structure with no lateral obstructions
Coaxial Cable
:  RG6 (25’ provided) with F attached connectors. May be extended up to 100’. Longer lengths are possible, based on frequency
Antenna
:  105” vertical antenna with 3” feedline (2.75 meters total). Vertical antenna: 1.0” tapering to 7/8”. Aluminum tube, telescoping. Feedline: high flexibility; single, stranded copper conductor in PVC jacket. Ground line: not provided.
Antenna Insulators
:  (2) Plastic, split block clamp design, 1.0” ID
Antenna Mount
:  Aluminum “C” channel: H 10.5”, W 2.5”, D 1 3/16”. With mounting holes (for flat surfaces) and strap slots (for pipe). The Range Extender Antenna's universal channel mount can be attached to the top of various mounting supports.
Antenna Tuner Dimensions:
H 8.0”, W 4.5”, D 2.75”. Construction: polycarbonate with see-though access door, lockable.
Controls:
RF meter, frequency range switch, tuning control.
Connections:
Coax (F) connector, antenna bolt, lightning ground bolt.
Hardware:
Stainless steel and/or corrosion resistant.
Exposed Parts:
Aluminum.
Certification
:  Made in the USA. Talking House FCC Certification DLB5LTT98
FCC License
:  Not required if installed per FCC Rules Part 15.219.
Illustrated Instructions
:  Included
Shipping Weight:
7.0 lbs with cable and packaging, one container.